Forum

Guest  

Welcome Guest, posting in this forum requires registration.

Pages: [1]
Topic: 80' can am 175
HondaDude96
Member
Posts: 1
80' can am 175
on: July 29, 2012, 00:06

Im looking for the fill hole for the two stroke oiler system on my 80 Can Am 175. Ive looked and I cannot seem to find it. There is lines that lead into the crankcase and carb from the top of the frame to the front of the air filter, but me and my helper assumed they were vacuum lines. We have the assumption they are there to send oil to the intake and pump driven bearing oiling system.


It would also be helpful if i were given some specs and manuals for my bike in pdf format if that can be arranged.


Thankyou for your time

Jake


Oleschool
Member
Posts: 6
Re: 80' can am 175
on: September 11, 2012, 03:26

Take a look in front of the fuel tank on the frame.There should be a dipstick there.


I bought a basket case 79 Q250 a few years ago thinking I would just tinker with it and get it running.I ended up completely rebuilding the bike and enjoy blasting around on it.

Bailey I
Member
Posts: 9
Re: 80' can am 175
on: September 28, 2012, 05:37

1980 was premixed!


Pages: [1]
WP Forum Server by VastHTML | LucidCrew
Version: 1.6.7 ; Page loaded in: 0.027 seconds.

Comments are closed.